Advertisement
3.2.2 Console Port
See Figure 3-4 for console port. The switch console port and computer controlling 9-pin serial port are
connected with RJ-45-DB9 cable. You can call the console software of the device by operating the
superterminal software of the Windows system for device configuration, maintenance, and
management.
See Figure 3-5 for cable sequence of RJ-45-DB9.
One end of RJ-45-DB9 cable is RJ-45 connector, which needs to be inserted into the console port of
the device. And the other end is DB9 plug, which needs to be inserted into the computer controlling
9-pin serial port.
See Table 3-1 for pin description.
DB9 pin
2
3
5
3.2.3 SFP Port
The signal is transmitted through laser by optical fiber cable. The laser conforms to the requirement
of level 1 laser products. To avoid injury upon eyes, do not look at the 1000 Base-X optical port
directly when the device is powered on.
Console port
Cable sequence of RJ-45-DB9
Table 3-1 Pin description
RJ-45 pin
Signal
3
RXD
2
TXD
5
GND
User's Manual
Description
Receiving data.
Sending data.
GND
Installation 10
Advertisement
