Table of Contents
Advertisement
M1.1 WL
Settings – clock
Setting the time in 24-hour format
Press the SET button to confirm the selection "24".
The hours now flash on the display.
Press the BIKE button to set the hours.
Press the SET button to confirm the hour setting.
The minutes then flash.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response "Set Ok" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M1.1 WL returns to function mode.
16
Advertisement
Table of Contents
