Unit - VDO M1.1 WL Manual

M1.1 WL
Settings – unit
Use the unit settings to specify whether the speed should be
displayed in kmh or mph.
Press and hold the SET button until the settings menu
opens.
"Language" appears on the display.
Press the BIKE button to scroll to the setting for the unit.
Press the SET button to open the unit setting.
"KMH" flashes in the top line of the display.
Press the BIKE button to change the unit to "MPH".
Press the SET button to confirm the setting.
The response "Set Ok" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M1.1 WL returns to function mode.
14