Table of Contents
Advertisement
INSTALLATION
9.
Carefully set the upper door back into place. Fix
the other, separately supplied upper door hinge
into place. Ensure the fridge door is aligned
horizontally and vertically so that the seals are
closed on all sides before finally tightening the
top hinge.
10. Insert the hinge bracket.
11. With the door closed, check that the door is
aligned horizontally and vertically and that
the seals are closed on all sides before finally
tightening the bottom hinge. Re-adjust the
levelling feet as needed.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a
sponge or cloth. Wash the shelves and salad bin in warm soapy water and dry completely before replacing in
the unit. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and
to allow it time to fall to the correct temperature. Your unit should not be overfilled.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to settle.
10
Advertisement
Table of Contents
