Bios-Contained Model Number And Serial Number - IBM PC 300 Maintenance Service Manual

BIOS-contained Model Number and Serial Number

The model number and serial number information is stored in BIOS ROM and displayed in the "Model Information" of BIOS
Setup main menu. If a repair is completed by replacing the system board or installing a new BIOS ROM, then you need to
enter the original system model number and serial number in the new BIOS ROM.
To enter the model number and serial number into BIOS:
1. Prepare a bootable DOS diskette with VPD.EXE files.
2. Insert the diskette and boot from drive A.
WARNING: Do not boot with any memory related driver such as HIMEM.SYS, EMS.SYS
3. At the DOS prompt, type A: >VPD then press Enter. You will be asked if you want to update the serial number, type Y
to continue. When the screen shows:
Serial Number:
4. Enter the serial number and press Enter to continue. You can type a maximum of 7 characters (without spaces).
5. Follow the instructions on the screen to complete the procedure.
6. Type A: >VPD and press Enter to display and verify your input model number and serial number information.
43