Table of Contents
Advertisement
v1.5 October 26, 2022
INCOMM L510 LAMP CONTROLLER USER GUIDE
L510 H3 AND H4 MODULAR PLUG CONNECTIONS
H3 RJ12 6-pin socket – Pins 2,3,5 provide an S5-Bus connection from the L510.
Accepts a 6P6C RJ12 modular plug.
Pins 1,4,6 not used.
A 250mm and 3000mm pre-built cable depicted above is available for order.
62-1345 = CABLE ASSY, 3 PIN 250MM, RJ12 TO S5BUS W, 62-1345.10 = CABLE ASSY, 3 PIN CABLE, 3000MM, S5, 3 Pin
Connector to RJ12 Connector.
Figure 2. L510 H3 RJ12 Socket
Figure 3. RJ12 Plug (Molex 90075-031 or similar)
H4 RJ9 4-pin socket – Pins 2,3 provide an input to connect an external dry contact switch.
Accepts a 4P4C RJ9 modular plug. Pins 1 and 4 are not used
The typical use is to monitor an entry door or balcony door switch. You can configure the desired functionality via Inncom's
INNTool/EngINN software.
Figure 4. L510 H4 RJ9 Socket
Figure 5. RJ12 Plug (Molex 90075-0027 or similar)
31-00593-01
4
Advertisement
Table of Contents
