Table of Contents
Advertisement
Release of RXT Firmware 1.5.0.9
December 2007
Enhancements
• Higher data transfer rate of 110MB/sec for uncompressed data in optimal
environments
• Additional capacity option of 2TBs (2 x 3.5" at 1TB per drive) for Silver RXT media
packs
Known Issues
• While rebuilding the RAID array on RXT media for the RXT350 and RXT150, the
progress bar for the operation might reflect an incorrect percentage number (that
is, over 100%) before completing. Unless an error message indicates otherwise,
the RAID array is successfully rebuilt after the operation finishes.
Release of RXT Firmware 1.4.0.33
November 2006
Enhancements
• Improved diagnostics
• Improved error handling
• Improved Web interface
• Added availability of different trace levels and types
• Added support of Read Buffer Command
• Works with Adaptec HBAs under Linux (except two; see Known Issues, below)
• Added drive temperature fault feature
• Web interface logs out when password is changed
• Added new diagnostic to change pack serial number and EC level
• Host name now appears in the bottom toolbar of the Web interface
Spectra RXT Firmware
9
Advertisement
Table of Contents
Need help?
Do you have a question about the Spectra RXT Media and is the answer not in the manual?
Questions and answers