In order to change the rinse aid level, follow the below steps before turning on the machine:
• Push the programme button and hold it down.
• Turn on the machine.
• Hold down the programme button until "rA" disappears from the display. Rinse aid setting follows
water hardness setting.
• The machine will display the last setting.
• Set the level by pushing the programme button.
• Switch off the machine to save the setting.
• The factory setting is "4".
• If the dishes are not drying properly or are spotted, increase the level. If blue stains form on your
dishes, decrease the level.
LEVEL
1
2
3
4
5
BRIGHTENER DOSE
Rinse-aid not dispensed
1 dose is dispensed
2 dose is dispensed
3 dose is dispensed
4 dose is dispensed
INDICATOR
R1 is shown on the display.
R2 is shown on the display.
R3 is shown on the display.
R4 is shown on the display.
R5 is shown on the display.
EN
42