5.6
Securing the burner to the boiler
Provide an adequate lifting system of the burner.
Boiler door must have a max. thickness of 100
mm, refractory lining included.
WARNING
5.6.1
Hinge installation
Install the hinge 4), supplied as standard, as shown in Fig. 9.
S7393
5.7
Positioning the probe - electrode
Respect the positions shown in Fig. 11.
WARNING
~
Probe
D5104
4
47 mm
Installation
Separate the combustion head assembly from the burner
body by removing nut 1) and removing the group A)(Fig. 10).
Fix the group B)(Fig. 10) to the boiler plate 2), inserting the
supplied insulating gasket 3).
The seal between burner and boiler must be
airtight.
WARNING
A
Fig. 9
Electrode
Diffuser
2.0 - 3.0 mm
15
GB
1
Probe
Electrode
3.7
=
3
2
D5096
B
Fig. 10
Fig. 11
20063701