Table of Contents
Advertisement
1. Before Using the Product
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in an
explosion, fire, electric shock, or failure.
CAUTION
-
There are switches and jumpers on this product that need to be set in advance.
Be sure to check these before installing this product.
-
Only set the switches and jumpers on this product to the specified settings.
Otherwise, this product may malfunction, overheat, or cause a failure.
-
Do not strike or bend this product.
Otherwise, this product may malfunction, overheat, cause a failure or breakage.
-
Do not touch this product's metal plated terminals (edge connector) with your hands.
Otherwise, this product may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.
-
Do not install or remove this product to or from the extension slot while the computer's power is
turned on. And also do not connect this product and external device while the power is turned on.
Otherwise, this product may malfunction, overheat, or cause a failure.
Be sure that the personal computer or the I/O extension unit power is turned off.
-
Do not connect or remove a cable with or from this product while the computer's power is turned on.
And also do not connect this product and external device while the power is turned on.
Otherwise, this product may malfunction, overheat, or cause a failure.
Be sure that the personal computer or the I/O extension unit power is turned off.
-
When you use this product in a noisy environment or are nervous about noise, attach ferrite cores to
the connection cable
-
Make sure that your PC or expansion unit can supply ample power to all the products installed.
Insufficiently energized products could malfunction, overheat, or cause a failure.
-
The specifications of this product are subject to change without notice for enhancement and quality
improvement.
Even when using this product continuously, be sure to read the manual and understand the contents.
-
Do not modify this product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
6
SMC-4DF-PCI, SMC-8DF-PCI
Advertisement
Table of Contents
Need help?
Do you have a question about the SMC-4DF-PCI and is the answer not in the manual?