Stamina 40-0058A Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 3
Attach the MOUNTING BRACKET(6) to the HANDLEBAR POST(62) with ROUND HEAD SCREWS
(M5x0.8x15mm)(7).
STEP 4
Install two AA batteries into the METER(1), the batteries are not included. See page 10 for detailed battery
installation instructions. Slide the METER(1) onto the MOUNTING BRACKET(6). Plug the SENSOR
WIRE(43) into the connecting wire of the METER(1).
STEP 5
Refer to the illustration below. Hook the RESISTANCE TUBES(22) to the D RINGS(25) with the LINKS(55)
on both sides.
9