The radio continues scanning the remaining channels in the
2
list.
OR
Using the Menu Select button:
Press the Menu Select button directly below DynP to
1
change the priority of a non-priority channel in the scan list
to Priority-Two.
Press H momentarily to exit the scan list and resume
2
scanning.
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a "nuisance" channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
Deleting a "nuisance" channel is only possible through
Note:
the preprogrammed Nuisance Channel Delete
button. This feature is not accessible through the
menu.
54
English
Procedure:
Using the preprogrammed button:
When the radio is locked onto the channel to be deleted,
1
press the preprogrammed Nuisance Delete button.
The radio continues scanning the remaining channels in the
2
list.
OR
Using the Menu Select button:
When the radio is locked onto the channel to be deleted, >
1
or < to NuisDel.
Press the Menu Select button directly below NuisDel.
2
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the
following:
Turn the radio off and then turning it on again.
•
OR
Stop and restart a scan via the preprogrammed Scan button
•
or menu.
OR
Change the channel via the Mode knob.
•