Radio Programmed For Non-Talkback Scan; Deleting A Nuisance Channel; Restoring A Nuisance Channel - Motorola Astro APX Mobile 05 control head User Manual

The radio does not begin scanning again for a predetermined
hang time after you release the PTT button, allowing the other
party to respond. If the other party responds within the hang
time, scanning does not resume until the full hang time expires
after they have finished speaking, allowing the conversation to
be completed.
To transmit on the selected channel if another channel is active,
first turn scan off by pressing the Menu Select button below
SCAN momentarily.

Radio Programmed for Non-Talkback Scan

Procedure:
1
Press the PTT button at any time to transmit on the selected
channel or fixed channel.
To make a Call Alert page, or Private Conversation call while
scanning, press either the Menu Select button directly below
PAGE CALL
or . The call is entered on the selected channel and
scanning is halted until the call is exited by pressing
pressing the Menu Select button below either

Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise
(termed a "nuisance" channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
Procedure:
1
When the radio is locked onto the channel to be deleted,
>
2
Press the Menu Select button directly below NUIS.

Restoring a Nuisance Channel

Procedure:
To restore the deleted nuisance channel, do one of the
following:
H
or
•
Turn scan off, then on.
PAGE CALL
or .
OR
•
Change modes.
OR
•
Turn off the radio, and then turn it back on.
Nuisance mode delete can be disabled by the system
administrator.
<
or to NUIS.
55
English