Talkback; Deleting A Nuisance Channel; Adding A Deleted Nuisance Channel Back To The Scan List; Prioritization Of A Scan List Member - Motorola 89FT3798 Manual

#ELP_Display.book Page 19 Friday, May 14, 1999 5:39 PM

TALKBACK

If the programmable Talkback option is set, you
can respond to any calls received during the
scan operation by pressing the PTT before the
programmed hang-time ends. Check with your
dealer for details.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted
calls or noise (a "nuisance" Channel), you can
temporarily remove it from the scan list by
performing a Nuisance Channel Delete
operation.
1. While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance Channel
Delete button until you hear a tone.
2. Release the Nuisance Channel Delete button.
The nuisance channel is deleted.
NOTE: You cannot perform a Nuisance Channel
Delete on a priority channel or if there is only
one remaining channel in the scan list.
ADDING A DELETED NUISANCE
CHANNEL BACK TO THE SCAN
LIST
1. Press the Scan button to stop the scan oper-
ation.
2. Press the Scan button again to re-start the
scan operation. The Deleted Nuisance Chan-
nel is reinstated to the scan list.
PRIORITIZATION OF A SCAN LIST
MEMBER
You may want your radio to check a particular
channel more frequently for calls. Prioritization
of scan list members is done by your dealer
using the Customer Programming Software.
Check with your dealer for details.
Priority Channel Scanning Sequence
Ch1 Ch2
None specified
...
Ch4 Ch1
Ch2 Ch1
Channel 2
Ch2 Ch4
Ch3
Ch2 Ch3
Ch2 ...Ch1
19
English