Deleting A Nuisance Channel; Restoring A Channel To The Scan List - Motorola EM200 User Manual

DELETING A NUISANCE CHANNEL

Note: Your dealer must have preprogrammed
If a channel continually generates unwanted
calls or noise (a "nuisance" channel), you can
temporarily remove it from the scan list:
1 While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2 Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot delete a priority channel or

Restoring a Channel to the Scan List

1 Press the Scan button to stop the scan.
2 Press the Scan button again to start scanning
again. The Deleted Nuisance Channel is
restored to the scan list.
24
English
a button to Nuisance Delete to access
this feature.
last remaining channel in the scan list.