Usb Operation - Philips TAB8947 User Manual

to select the AUX, OPTICAL, HDMI
eARC/ARC, HDMI 1, HDMI 2 mode.
2
Operate your audio device directly
for playback features.
3
Press the VOL +/– buttons to adjust
the volume to your desired level.
Tip
•
While in OPTICAL/HDMI ARC mode, if there's
no sound output from the unit and the status
Indicator flashes, you may need to activate PCM
or Dolby Digital Signal output on your source
device (e.g. TV, DVD or Blu-ray player).
•
The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set to
PCM or Dolby Digital (Refer to the user manual
of the input source device for its audio setting
details) with HDMI 1 / HDMI 2 / HDMI ARC /
optical input.
•
In HDMI mode, when the DOLBY ATMOS audio
format is entered, the Soundbar display shows
DOLBY ATMOS.
•
When the DOLBY DIGITAL audio format is
entered, if surround sound is turned on, the
whispering wall display will display DOLBY
SURROUND, if surround sound is turned off, it
will display DOLBY AUDIO.
•
When the PCM audio format is entered, the
Soundbar display shows PCM AUDIO.
•
When entering non-PCM or DOLBY DIGITAL
audio formats, if there's no sound output from
the unit and the display show ERROR.

USB Operation

Enjoy audio on a USB storage device,
such as an MP3 player and USB flash
memory, etc.
1
Insert the USB device.
2
Press the
the unit or on the remote control to
select the USB mode.
3
During playback:
Button Action
Start, pause or resume play.
/
Skip to the previous or next track.
Tips
•
This product may not be compatible with
certain types of USB storage devices.
•
If you use a USB extension cable, USB hub,
or USB Multifunctional card reader, the USB
storage device may not be recognized.
•
Do not remove the USB storage device while
reading files.
•
The unit can support USB devices with up to
32 GB of memory.
•
This unit can play MP3 / WAV / FLAC.
•
Support a USB port: 5V
•
Only support FAT file system.
button repeatedly on
500mA.
EN 25