Table of Contents
Advertisement
3) PRODUCT DESCRIPTION
Panel Illustration
Average sensing RMS calibrated
RMS (Root-Mean-Square) is the term used to describe the effective or equivalent DC
value of an AC signal. Most digital multimeters use average sensing RMS calibrated
technique to measure RMS values of AC signals. This technique is to obtain the
average value by rectifying and filtering the AC signal. The average value is then
scaled upward (calibrated) to read the RMS value of a sine wave. In measuring pure
1) 5-4/5 digits 500000
counts LCD display
2) Push-buttons for special
functions & features
3) Selector to turn the
Power On or Off and
Select a function
4) Input Jack for 10A (+)
(20A for 30sec) current,
and for T2 (-) function
5) Input Jack (+) for all
functions EXCEPT current
(
A, mA, A) and T2
functions
6) Common (Ground
reference) Input Jack (-)
for all functions EXCEPT
T2 function
7) Input Jack (+) for
milli-amp, micro-amp, and
T2 (+) functions
3
Advertisement
Table of Contents
