Part Name And Function; Front; Front (When The Dust Cover Is Open) - NEC N8151-50A User Manual

Part Name and Function

The Built-In AIT and magazine have the following parts and functions.
Important
The part names, functions, and settings of the installed 5.25-in device and installed 3.5-in device
(drive only) are the same. (For clarity, we use the 5.25-in device in the explanations below.)

Front

7

Front (when the dust cover is open)

8
1
1
6 5 4 3
1 Dust cover
2
Protects the cartridge slot against
dust. (→ P. 92)
2 Ventilation holes
(The drive does not have ventilation
holes.)
3 EJECT button
Press this button when ejecting a data
cartridge. (→ P. 94)
4 REPLACE TAPE LED
LED that shows that the AIT data
cartridge needs to be replaced. (→
P.95)
5 CLEANING REQUEST LED
LED that shows the Built-In AIT
cleaning status. (→ P. 95)
6 TAPE MOTION LED
LED that shows the AIT data cartridge
status. (→ P. 95)
7 Brackets
8 Cartridge slot
Slot in which the AIT cartridge is set.
(→ P. 93)
Built-in AIT 73