Table of Contents
Advertisement
PRECAUTIONS
WARNING
To disconnect the power cord or adapter power cable, grasp the plug firmly and
pull.
Tugging on the cord or cable may damage it and result in fire or electrical shock.
WARNING
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.
WARNING
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage than
specified in this "Instructions for Use" may cause fire, electric shock, or equipment damage.
Power supply: 100-240 Vac 50/60 Hz
• Do not overload your power circuit, as this may result in fire or electric shock.
WARNING
Handle the power cord and AC adapter with care.
Do not place heavy objects on the power cord or AC adapter, or pull or tie the power
cord. Using a damaged power cord or AC adapter may result in fire or electrical shock.
WARNING
Never touch the power plug, AC adapter or power cord during a thunderstorm.
Touching them may result in electrical shock.
WARNING
When attaching an arm stand, please refer to the User's Manual of the arm stand and install
the unit securely.
Otherwise, the unit may become detached, resulting in injury and/or equipment damage.
Before installation, make sure that desks, walls, or any other installation surface has adequate
mechanical strength.
If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or electrical shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
WARNING
Do not touch a damaged LCD panel directly with bare hands.
If any part of your skin comes in direct contact with the panel, wash thoroughly.
If liquid crystal enters your eyes or mouth, immediately flush with large amounts of
water and seek medical attention. Otherwise, you may have a toxic reaction.
6
Advertisement
Table of Contents
