Eizo DuraVision FDX1204T Setup Manual page 20

3 | Reference
3. Attach the arm or stand to the monitor.
Attach using the VESA mount mounting screws supplied with this product.
When using commercially available screws, use screws that meet the following
conditions.
– Nominal diameter: M4
– Length: Between 7.9 mm and 10.0 mm (if using washers, add the washer thickness)
Clearance between the screw holes of the arm
or the stand:
75 mm x 75 mm
20
Clearance between the screw holes of the arm
or the stand:
100 mm x 100 mm