Whirlpool WA9260Q Manual page 35

Follow me
When you press this button, this icon will light , the remote
transmits the current temperature of the room to the indoor unit,
and the appliance will operate according to this temperature to
make it comfortable. Please keep the remote control in a
location where it can transmit the signal to the indoor unit
correctly.
Press once to activate and again to cancel.
Screen turn off function
Press the DISPLAY OFF button to turn the screen light on or off
on the control panel of the indoor unit.
Press once to turn off the light of the indoor unit's screen, press
again or press any other button to turn on the screen again.
If you press the other buttons when the light on the unit's
display is off, press once to turn on the light, press a second
time to activate the function.
Super silence function
Press the SUPER SILENCE button to allow the air conditioner
to operate at a low noise level to obtain a quiet and comfortable
environment in your room
Press once the super silence icon will appear on the screen
of your remote control.
To turn off the super silence mode press the SUPER SILENCE
button again or press the MODE, FAN, TURBO, PERFECT
SLEEP, SMART buttons.
Energy saving function
The POWER SAVER energy saving mode can be activated in
the Cooling, Heating, and Ventilation operation mode only.
When you press this button, this icon will be displayed on the
remote control
The POWER SAVER function will adjust the temperature to
25°C with a low fan speed in the heating cooling mode and dry
mode, when the fan mode is selected it will only be set at a low
fan speed.
Change the mode or press the energy saving button again to
cancel this function
Note: The fan speed and temperature cannot be adjusted under
this mode. The "TURBO" function cannot be used in this case.
12