Battery Replacement Process
Preliminary Requirements
Required Tools and Components
Tools
T6 (Torx) driver
•
Anti-static wrist strap (1 MOhm resistance)
•
Soft ESD safe mat
•
Microfiber / lint free cloth
•
Gloves
•
Safety glasses
•
Bucket of sand (1 gallon)
•
Clean, dry, untreated sand (0.5 gallons)
•
Cotton swab
•
Plastic pry tool (spudger)
•
Plastic tweezers
•
Components
Bumper (Refer to
•
Battery Lid Screw (PN) Qty. 4
•
Prerequisite Steps
Discharge the battery
For devices with rechargeable lithium-ion batteries that power on, fully discharge the battery
before beginning repair. To expedite the battery discharge process:
Connect the controller to a device wirelessly.
•
Operate the device in wireless mode until the battery is fully discharged and the device
•
powers off.
Remove Top Case
Remove the top case as detailed in the Procedure – Removal (Top Case) for the appropriate
device.
(page 14)
Illustrated Service Parts
List)
31
Need help?
Do you have a question about the XBOX CONTROLLER and is the answer not in the manual?