Vogt BP360 Service Manual page 3

Vogt Ice, LLC
1000 W. Ormsby Ave, Ste. 19
Louisville, KY 40210
502-635-3235
FAX 502-635-3024
Model Number:
This form must be filled out completely and signed by the customer in order to assure acceptance by Vogt
Date of Start-Up:
Distributor
Company Name:
Address:
Service Company
Company Name:
Address:
Customer (Location of Equipment)
Company Name:
Address:
PRE-OPERATION CHECK
Machine room suitable 38°F min., 110°F max.
Motor Power Supply _____ V _____ PH _____ Hz (machine
not running)
Control Power Supply _____ V _____ PH _____ Hz (machine
not running)
Water supply and drains connected properly
Machine securely mounted to floor
Oil cooler water supply and return plumbed
Water injection supply plumbed
Ice supply system properly attached to ice chute
Wired contacts from photovoltaic to ice supply system
Tools clear of machine and compacting chamber
Instruction manual and warranty certificate left on-site
Name of person left with: _________________________
Comments:
Technician Signature:
I certify that I have performed all of the above procedures
Warranty Registration / Start-Up Form
BP360 Automatic Ice Block Press
Serial Number:
Form Completed By:
City:
City:
City:
Motor Power Supply _____ V _____ PH _____ Hz (machine running)
Control Power Supply _____ V _____ PH _____ Hz (machine running)
Proper direction of rotation on hydraulic pump motor
Machine cycles properly
Hydraulic motor amps RLA _____ Actual _____
Water injection timer set properly
Compact hold delay set properly
Compact hold delay light on panel turns on once per cycle
Pressure gauge on manifold achieves 2000 PSIG when compacting block
End User Signature:
Vogt Order No.:
THIS FORM MUST BE SENT TO VOGT TO
ACTIVATE WARRANTY
Phone:
State:
Phone:
State:
Phone:
State:
OPERATION CHECK
Zip:
Zip:
Zip: