Firmware Update In Asset Manager For Mindconnect Nano - Siemens MindConnect Nano System Manual

Firmware update for Mindconnect Nano

5.2 Firmware update in Asset Manager for MindConnect Nano

The network and SAL settings will be reset to their initial state on MindConnect Nano.
All SAL and script logging files will be deleted.
Load new firmware on your MindConnect Nano
1. Download the firmware ZIP file from Siemens Industry Online Support Page.
Firmware download MindConnect Nano
2. Unzip the firmware on your local machine.
3. Copy the unzipped files to a USB stick.
4. Insert the USB stick into the MindConnect Nano and wait until the firmware update is
complete.
Update carried out: ERROR LED flashes orange
MindConnect Nano reboots
MAINT LED flashes orange for a few seconds
RUN LED orange (not connected to Industrial IoT)
5. Disconnect the USB stick.
5.2 Firmware update in Asset Manager for MindConnect Nano
In Asset Manager, you can update the firmware of your MindConnect Nano.
Outdated version
Please keep your firmware always updated.
Data loss
Please note that data loss can occur during the time of the firmware update. The
amount of data loss depends on the reading and uploading cycle.
To perform a firmware update, follow these steps:
1. Select the asset in the "Asset" tab.
2. Open the MindConnect plugin.
3. Click next to "Firmware" on the button
4. Accept the terms and conditions.
MindConnect Nano
System Manual 7/2023
.
90