TABLE OF CONTENTS INTRODUCTION .................................. 3 ABOUT THIS MANUAL ..............................3 ELATEC SUPPORT ................................3 REVISION HISTORY ..............................3 INTENDED USE .................................. 3 SAFETY INFORMATION ..............................4 TECHNICAL DATA ................................5 MODE OF OPERATION ..............................6 OPERATING MODE ...............................6 POWER UP ..................................6 ENUMERATION ................................6 INITIALIZATION ................................6...
Any use other than the intended use described in this section, as well as any failure to observe the safety information listed in this document, will be considered misuse and will void the warranty. ELATEC is not responsible for any damage or injuries resulting from any misuse of the product.
The user is liable for the use of spare parts or accessories other than the ones sold or recommended by ELATEC. ELATEC is not responsible for any damage or injuries resulting from the use of spare parts or accessories other than the ones sold or recommended by ELATEC.
If you are unsure about any part of the safety information above, contact ELATEC support. Any failure to observe the safety information above will be considered misuse and will void the warranty. ELATEC is not responsible for any damage or injuries resulting from any misuse of the product.
SUSPEND MODE TWN4 MultiTech LEGIC M supports the USB suspend mode. If the USB host is signaling suspend via the USB bus, the reader module is turning off most of its power consuming peripherals. During this operation mode, no detection of transponders is possible and all LEDs are turned off.
6 COMPLIANCE STATEMENTS TWN4 MultiTech LEGIC M is in compliance with the EU directives and regulations as listed in the respective declaration of conformity. UNITED KINGDOM TWN4 MultiTech LEGIC M complies with the requirements of the UK legislations and other regulations as listed in the respective UKCA declaration of conformity.
Page 9
Elatec reserves the right to change any information or data in this document without prior notice. Elatec declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification.
Need help?
Do you have a question about the TWN4 MULTITECH LEGIC M and is the answer not in the manual?
Questions and answers