Replacing The License Plate Light Bulb; Supporting The Motorcycle - Yamaha MT-07M 2015 Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
out.
4
3
5
4 3
1. License plate light unit
2. Collar
3. Washer
4. Nut
5. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
EAU59890
1. License plate light bulb
2
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars, washers and
2
nuts.
Periodic maintenance and adjustment
1
7-36

Supporting the motorcycle

Since this model is not equipped with a
centerstand, use maintenance stands
when removing the front or rear wheel
or when performing other maintenance
that requires the motorcycle to stand
up right.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
EAU67131
7