Yamaha MT-07M 2015 Owner's Manual page 38

Instrument and control functions
To install the passenger seat
1. Insert the projections on the front
of the passenger seat into the seat
holders as shown, and then push
the rear of the seat down to lock it
in place.
4
2
1. Projection
2. Seat holder
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat, and
then remove the hexagon wrench
located on the bottom of the seat.
2
1. Passenger seat
2. Hexagon wrench
1
2. Pull up the corners on the rear of
the rider seat as shown and re-
move the bolts with the hexagon
wrench.
1. Bolt
3. Lift the seat rearward and up to re-
move it.
4-20
To install the rider seat
1. Fit the slot in the seat onto the pro-
jection on the frame cross mem-
1
ber as shown, and then place the
seat in the original position.
2
1. Slot
2. Projection
1
2. Install the bolts with the hexagon
wrench.
3. Insert the hexagon wrench back
into its holder on the passenger
seat.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
1