Yamaha MT-07M 2015 Owner's Manual page 28

Instrument and control functions
TIP
 The odometer will lock at 999999.
 The tripmeters will lock at 9999.9
but can be manually reset.
Fuel reserve tripmeter
When the fuel level becomes low, the
fuel level warning indicator and the last
4
segment of the fuel meter will start
flashing. The display will change to the
fuel reserve tripmeter "TRIP F" and
start counting the distance traveled
from that point. In this case, push the
left set button to switch the display in
the following order:
TRIP F → km/L or L/100 km → AVE_
_._ km/L or AVE_ _._ L/100 km → _ _
°C → Air_ _ °C → ODO → TRIP 1 →
TRIP 2 → TRIP F
TIP
 Push the right set button to chan-
ge the display in the reverse order.
 You can manually reset the fuel re-
serve tripmeter, or after refueling
and traveling 5 km, it will reset au-
tomatically and disappear from
the display.
Instantaneous fuel consumption
1
1. Instantaneous fuel consumption display
This function calculates the fuel con-
sumption under current riding condi-
tions.
The instantaneous fuel consumption
can be set to either "km/L" or "L/100
km".
 "km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
4-10
 "L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
To switch the instantaneous fuel con-
sumption settings, push the left set
button for one second.
TIP
If traveling at speeds under 20 km/h, "_
_._" is displayed.
Average fuel consumption
1
1. Average fuel consumption display
This function calculates the average
fuel consumption since it was last re-
set.