Set-Up; Electrical Power; Grounding Instructions - Life Fitness INT-SL-XF-14 Assembly Instructions Manual

Set-Up

Read the entire manual before setting up the treadmill. Place the treadmill where it will be used before beginning the
setup procedure.
Electrical Power Requirements
The treadmill requires a dedicated* line with isolated neutral according to the electrical configurations listed in the
chart below.
• Units with Integrity SL console can be used with an optional attachable TV. Use of an attachable TV requires an
external power supply.
• Units with Discover consoles require a 24 VDC power supply.
Console
Integrity SL
Discover SE4
Supply Voltage
100 / 120
200 / 220 / 230 / 240
Commercial Units Only: One individual branch circuit for each treadmill per NEC article 210-21 (b) (1) and 210-22 (or
*
other appropriate, country specific electrical compliance guidelines). The hot and neutral wires must each be routed
independently (not looped or tied to other circuits).
NOTE: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet,
have a proper outlet installed by a qualified electrician.

Grounding Instructions

This product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides a path
of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the equipment.
Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding
plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all
local codes and ordinances.
WARNING: A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North
America. If a properly grounded, 20-amp outlet is not available, one must be installed by a qualified electrician.
Models drawing 16 amps or more must be installed on a dedicated line. (Commercial Units Only).
AVERTISSEMENT : Si vous êtes aux États-Unis, n'utilisez PAS d'adaptateur temporaire pour raccorder la fiche à
un adaptateur bipolaire. Si aucune prise de 20 A correctement mise à la terre n'est disponible, il convient d'en
faire installer une par un électricien qualifié. Les modèles utilisant 16 A ou plus doivent être installés sur des
lignes qui leur sont réservées. (Gamme commerciale uniquement).
WARNING: A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North
America. If a properly grounded, 15-amp outlet is not available, one must be installed by a qualified electrician.
(Consumer Units Only).
AVERTISSEMENT : Si vous êtes aux États-Unis, n'utilisez PAS d'adaptateur temporaire pour raccorder la fiche à
un adaptateur bipolaire. Si aucune prise de 15 A correctement mise à la terre n'est disponible, il convient d'en
faire installer une par un électricien qualifié. (Gamme grand public uniquement).
DANGER: A risk of electrical shock may result from improper connection of the equipment-grounding
conductor. Check with a qualified electrician if in doubt as to proper grounding technique. DO NOT modify the
plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified
electrician. Any modification to the electrical plug will result in a voided warranty.
DANGER : Un branchement incorrect du conducteur de mise à la terre de l'équipement peut entraîner des
risques de décharges électriques. Consultez un électricien si des doutes subsistent quant à la technique de
mise à la terre. NE MODIFIEZ PAS la fiche fournie avec l'appareil. Si cette dernière n'entre pas dans la prise,
faites effectuer l'installation par un technicien qualifié. Toute modification de la fiche entraînerait une annulation
de la garantie.
Supply Voltage
95 - 264 VAC
95 - 264 VAC
Frequency (Hz)
50 / 60
50 / 60
Frequency Output Voltage
47 - 63 Hz
47 - 63 Hz
Commercial Units Outlet &
Breaker (Amps)
20
10
Page 8 of 37
Output Current
24 VDC
24 VDC 3.75 A
Consumer / Home Units
Outlet & Breaker (Amps)
15
10
2.5 A