Installation & Operation; Icm Placement Instructions - FRIGOGLASS Flex 35 HC User Manual

ENG
3. Installation & Operation
3.1

ICM placement instructions

a. After unpacking, check the cabinet for any damage caused during transportation. In the event of
damage, please contact the forwarding company.
b. Always ensure that your merchandiser is installed on a stable surface/floor and is properly
leveled. There is 1 adjustable foot and 1 stable foot in all models at the front under the chassis.
5
Models Flex 35 HC, Flex 45 HC and Flex 60 HC are equipped with HC
refrigerant, and have been tested and proven to be safe according to
related standards.
All necessary actions for safe usage & maintenance of this
appliance are described in this manual and need to be followed
carefully. This appliance must be installed only by a suitably
qualified person.
Failure to comply with the instructions may result in high-energy
consumption, poor performance of the unit and void warranty.

Keep all ventilation openings in the appliance enclosure or in
the built-in structure clear of obstruction.

Do not use mechanical devices or means other than those
recommended by the manufacturer to accelerate the defrosting
process.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage
compartments of the appliance, unless recommended by the
manufacturer

If the supply cord is damaged, it must be replaced by the
manufacturer, its service provider or similarly qualified persons
in order to avoid a hazard.
Do not place the merchandiser:

in direct sunlight or near heat sources (radiators, stoves & other
heating equipment)

outdoors, without proper protection from rain, moisture and
other atmospheric elements

in climate conditions for which it is not certified

in extreme environmental conditions (i.e. extensive exposure to
saline humidity)

on a surface with an angle more than 5
o