First Aid; Disposal Of The Unit And Packaging - FRIGOGLASS Flex 35 HC User Manual

ENG
FAULT
The ICM makes
noise.
There is water on the
floor.
The lights don't
work.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:

Type of ICM

Serial number of the ICM

Brief description of the problem / observation

6. First Aid

In case of accident, proceed to the following:
ACCIDENT
Inhalation of refrigerant
Contact with eyes
Contact with skin

7. Disposal of the unit and packaging

For detailed information regarding the recycling of this product and its packaging, please contact your
local city office, your waste disposal service or the manufacturer through its service agent. By ensuring
this product and its packaging are disposed of properly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise incur by this product's
and packaging inappropriate disposal.
Packaging consists of wooden pallets, cardboard/ plastic parts and stretch film. Cardboard, kraft
paper, plastic parts and films can be disposed for recycling at your curbside collection bins or at your
local recycling facility. Wooden pallets may be reused or disposed for energy recovery.
9
POSSIBLE REASONS
Intense metallic noise.
Inclined or curved floor.
The drainage hole for the
condensate water is blocked.
There is a leakage in the tray.
The lighting or the transformer are
out of order.
IMMEDIATE ACTION
Take deep breaths of clean air. If irritation persists, contact a
doctor.
Wash your eyes thoroughly with plenty of water for at least 15 minutes
and then consult a doctor.
Wash immediately with water.
HANDLING
Call a Service technician.
Level the ICM properly by adjusting its
feet. Placing a spirit level on the top of
the ICM will assist you in leveling it.
Unblock the drainage hole.
Call a Service technician.
Call a Service technician.