Connection To The Mains Supply; Maintenance; Preventive Maintenance; Cleaning - FRIGOGLASS CL 950 User Manual

ENG

3.3 Connection to the mains supply

Connect the ICM to a 230V, 50Hz power supply on a min 10A fused & grounded
socket. Do not use extension cables. If the power cord is not long enough, either
install a new socket nearby or ask an authorized electrician to replace the cord with a
longer one.

4. Maintenance

Prior to any cleaning or maintenance procedure, unplug the
ICM!

4.1 Preventive Maintenance

1. Clean the condenser once or twice yearly using a vacuum cleaner.
2. Use mildly soapy water to clean the interior of the ICM. Use a window-cleaning
agent to clean the glass surface.

4.2 Cleaning

It is important to clean the merchandiser twice a year. In order to avoid mould
formation, odours, etc. product compartments must also be thoroughly cleaned. The
interior of the ICM has to be cleaned with a mild soapy cloth.
Remember to disconnect the mains from the socket before
cleaning the ICM's interior or exterior.

4.3 Operation

Energy saving tips:
For energy saving and ICM's better performance:
•
Load your ICM at night-time so that the drinks are cold once you get there in the
morning.
•
Store your back-up stock in a cool and/or dark place so that when reloaded, the
ICM will need much less time to cool them down.
•
Wipe moisture off the products you place in the ICM.
•
Avoid opening the door for long periods of time.

4.4 Replacing the LED tube light

Before replacing the LED tube light, unplug the ICM.
6