Talk Permit; Setting Talk Permit; Clear To Send; Setting Clear To Send - Motorola MTM800 E Feature User Manual

74 | Main Menu

Talk Permit

You can set a different tone upon pressing the PTT button.

Setting Talk Permit

Procedure:
1 From the home screen, press the
2 Select Setup → Tones → Talk Permit.
3 Select one of the following:
• No Tone — No tone heard upon pressing the PTT button.
• Short Tone — Short tone heard upon pressing the PTT button.
• Normal Tone — Factory-default tone heard upon pressing the PTT button.

Clear to Send

You can activate/deactivate tone for the transmitting radio that the receiving radio is ready to accept the transmission.

Setting Clear to Send

Procedure:
1 From the home screen, press the
2 Select Setup → Tones → Clear to send.
3 Select one of the following:
• Tone On — Activate clear to send tone.
• Tone Off — Deactivates clear to send tone.

Periodic Alert

You can activate/deactivate periodic tone indication for the missed calls and the unread messages. For each
notification, your radio generates an unread message tone with the amber LED color indication.

Setting Periodic Alert

Procedure:
1 From the home screen, press the
2 Select Setup → Tones → Periodic Alert.
3 Select one of the following:
• Alert — Activates/deactivates periodic tone.
• Period — Indicates the time between each periodic tone.

D-PTT Tones

This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in idle or the
Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, the user can press and hold the PTT button once again to get the permission to talk.
Otherwise, if the user presses the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk. The D-PTT tone is not
audible on a sending radio.
Send Feedback | |
key.
MENU
key.
MENU
key.
MENU