Note: This feature needs to be enabled by your service provider.
Setting D-PTT Tones
Procedure:
1 From the home screen, press the
2 Select Setup → Tones → D-PTT Tones.
3 Select one of the following:
•
D-PTT Mode — Activates/deactivates D-PTT tone.
•
Tone Style— Indicates how many times the D-PTT tone is played.
Display
This menu item allows you to adjust your radio display settings.
Related Links
Display
on page 20
Display
on page 20
Setting Time and Date on the Display
Setting Text Size
When and where to use: This feature enlarges the text on the display so you can see the interface in the environment
with the low visibility.
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Text Size.
3 Select one of the following:
•
Standard — Default size of the text.
•
Zoom — Large size of the text. Keep in mind that less text can be displayed.
Setting Screen Saver
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Screen Saver.
3 Select one of the following:
•
Activate — To activate/deactivate this feature.
•
Text — To set the text on the screen saver when this feature is activated.
Setting Backlight
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Backlight.
3 Select one of the following:
•
Auto – backlight is triggered by turning on the radio, by pressing any key on the device or on the accessory
that is connected to it. Also getting signal from the services like: Call-Out message, DGNA and TX timeout
during priority call are going to turn on the backlight.
key.
MENU
on page 76
key.
MENU
key.
MENU
key.
MENU
Main Menu | 75
| |
Send Feedback