Table of Contents
Advertisement
Printing from the Multi-Purpose Tray
4
Adjust the paper guide (
of the paper that has been set.
1
2
5
Thoroughly sort the paper. Carefully
align the ends of the paper horizontally.
3
6
Place the print side face-up, and set the
4
paper.
Note
z Do not set the paper beyond the MP paper guide (
7
) to the width
8
z When adding paper, remove the paper in the multi-
z Do not take out or add paper while printing.
z Do not place anything other than the paper to be printed
z The paper supporter will automatically lift up when the
).
- 86 -
Adjust the paper guide to fit the width
of the paper that has been set.
Release and return the setting lever (
to its original position.
Note
purpose tray, and align the additional paper top, bottom,
left, and right before setting.
on the multi-purpose tray, apply pressure from above, or
apply unnecessary force.
paper is set in place. If the paper supporter gets in your
way of setting paper in the tray, place paper after opening
the toner replacement cover, and then close the cover
when it is set in place.
)
Advertisement
Table of Contents
