Thermal, under-voltage, overcurrent Thermal, under-voltage, overcurrent Dimensions (WxHxD) 190x304x143mm 190x226x143mm DECLARATION OF CONFORMITY SAMSVARS ERKLÆRING We, Sleipner Motor AS Sleipner Motor AS P.O. Box 519 Postboks 519 N-1612 Fredrikstad, Norway N-1612 Fredrikstad, Norge declare that this product with accompanying Erklærer at dette produktet med tilhørende...
Dimensions PPC 520 (Drawing not to scale) ( 1 : 1 ) 180,0 Dimensions PPC 820 (Drawing not to scale) Designed by Material Type Date Drawing nr Tolerance NS-ISO 2768-1 03-01-060-120 Thomas Quiel 27.01.2015 180,0 Copyright All rights reserved Title PPC 5xx SL E IP N E R M O T O R A S komplett...
These instructions are only general instruction. If you are not skilled to do this work, please contact professional installers for assistance. NB! Faulty installation of the tunnel, thruster, PPC Power Control unit or panel will render all warranty given by Sleipner Motor AS void.
Note! Fig. 1 The Proportional Power Controller is a bulkhead (wall) mounted unit and must be installed in a dry and well ventilated compartment. The unit also requires a 200 mm minimum head clearance, 150mm minimum bot- tom clearence and a 100 mm minimum clearance ...
Control panel and control-leads Kontrollpanel og kontrollkabler Control panel installation: Kontrollpanel installasjon: • You can install as many panels as you wish by using optional • Det er mulig å installere så mange kontrollpanel som ønskelig ved å Side-Power S-link T-connectors bruke Side-Power S-link T-stykker.
• Connector for external “buzzer”/loud audible alarms Speed control joystick for Holding function for auto- bow thuster running of bow and stern thrusters together in the Speed control joystick for direction of the arrows at stern thuster selected power Press “+” for more and “-”...
Trouble shooting Before seeking assistance at the help desk of your Side-Power dealer/distributor please perform these tests and make notes of all measurements to ensure that they have as much information as possible to work on. NB! All check points and solutions must be carried out after consulting the relevant information elsewhere in this manual to under- stand how the system is intended to work.
Warranty statement 1. The equipment manufactured by Sleipner Motor AS (The “Warrantor”) is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years (Leisure Use) or one year (Commercial use) from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period.
Page 12
Tel: +47 69 30 00 60 Fax:+47 69 30 00 70 www.side-power.com sidepower@sleipner.no The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain.
Need help?
Do you have a question about the Side-Power PPC 820 and is the answer not in the manual?
Questions and answers