Driving Position Memory System - Acura MDX Sport Hybrid 2020 Owner's Manual

uuOperating the Switches Around the Steering WheeluDriving Position Memory System

Driving Position Memory System

You can store two driver's seat (except for power lumbar), steering wheel and door
mirror positions with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, or keyless
access system, door mirrors adjust to one of the two preset positions and the seat
adjusts to retracted positions of one of the two preset positions automatically.
The steering wheel and the seat will move to the stored position when you set the
power mode to ACCESSORY.
When you enter the vehicle, the MID briefly shows you which remote transmitter
you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
DRIVER 1 DRIVER 2
188
The driver's seat moves rearward and steering
wheel fully up depending on the set seating
position once you
• Stop the vehicle.
• Put the transmission in ( P .
• Turn the power system off.
• Then open the driver's door.
Once the power mode is in the ACCESSORY
position, the driver's seat and steering wheel
moves to the DRIVER 1 or 2 preset position.
1Driving Position Memory System
Using the information screen or MID, you can disable
the automatic seat, steering wheel and door mirrors
adjustment function.
2 Customized Features P. 131, 362
The driver's seat easy exit feature can be turned ON/
OFF.
2 Customized Features P. 131, 362
System Operation
The system will not operate if:
•
The vehicle speed is above 3 mph (5 km/h).
•
Either memory position button is pressed while the
seat or steering wheel is in motion.
•
The seat or steering wheel position is adjusted
while in operation.
•
The memory 1 or 2 position is set fully to the rear.