Driving Position Memory System - Acura NSX 2020 Owner's Manual

uuOperating the Switches Around the Steering WheeluDriving Position Memory System

Driving Position Memory System

You can store two driver's seat (except for power lumbar) and outside door mirrors
position with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, or keyless
access system, door mirrors adjust to one of the two preset positions and the seat
adjusts to retracted positions of one of the two preset positions automatically.
The seat will move to the stored position when you set the power mode to
ACCESSORY.
When you enter the vehicle, the driver information interface briefly shows you which
remote transmitter you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
DRIVER 1 DRIVER 2
* Not available on all models
138
*
The driver's seat moves rearward depending
on the set seating position once you
• Stop the vehicle.
( P .
• Put the transmission in
• Set the power mode to VEHICLE OFF.
• Then open the driver's door.
Once the power mode is in the ACCESSORY
position, the driver's seat moves to the
DRIVER 1 or 2 preset position.
*
1Driving Position Memory System
Using the audio/information screen, you can disable
the automatic seat and door mirrors adjustment
function.
2 Customized Features P. 244
The driver's seat easy exit feature:
•
Will tilt slightly forward and then move rearward to
allow you to more easily exit the vehicle.
•
Can be turned ON/OFF.
2 Customized Features P. 244
System Operation
The system will not operate if:
•
The vehicle speed is above 3 mph (5 km/h).
•
Either memory position button is pressed while the
seat or the outside mirror is in motion.
•
The seat or the outside mirror position is adjusted
while in operation.
•
The memory 1 or 2 position is set fully to the rear.
*