Indicator
Name
Road Departure
Mitigation (RDM)
Indicator
On/Blinking
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
Comes on if there is a problem
●
with the RDM system.
Comes on when the RDM system
●
shuts itself off.
Explanation
●
Stays on constantly - Have your vehicle
checked by a dealer.
Stays on - The temperature inside the camera
●
is too high.
Use the climate control system to cool down
the camera.
The system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera P. 475
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your vehicle in
a safe place, and wipe it off with a soft cloth.
●
Have your vehicle checked by a dealer if the
indicator and message come back on after
you cleaned the area around the camera.
2 Front Sensor Camera P. 475
uuIndicatorsu
Message
Continued
99