Yeti EP801 Owner's Manual page 30

ASTM
STANDARD CLASSIFICATION FOR BICYCLE USAGE
CONDITION 1
This is a set of conditions for the operation of a
bicycle on a regular paved surface where the tires
are intended to maintain ground contact.
CONDITION 4
This is a set of conditions for operation of a bicycle
that includes Conditions 1, 2, and 3, or downhill
grades on rough trails at speeds less than 40
km/h (25 mph), or both. Jumps are intended to be
less than 122 cm (48 in.).
YETI 160E | OWNER'S MANUAL
CONDITION 2
This is a set of conditions for the operation of
a bicycle that includes Condition 1 as well as
unpaved and gravel roads and trails with moderate
grades. In this set of conditions, contact with
irregular terrain and loss of tire contact with the
ground may occur. Drops are intended to be
limited to 15 cm (6 in.) or less.
CONDITION 5
This is a set of conditions for operation of a bicycle
that includes Conditions 1, 2, 3, and 4; extreme
jumping; or downhill grades on rough trails at
speeds in excess of 40 km/h (25 mph); or a
combination thereof.
CONDITION 3
This is a set of conditions for operation of a bicycle
that includes Condition 1 and Condition 2 as well
as rough trails, rough unpaved roads, and rough
terrain and unimproved trails that require technical
skills. Jumps and drops are intended to be less
than 61 cm (24 in.).
APPENDIX A
TABLE OF CONTENTS | 30