Push Button Door Control - Chamberlain C400 Owner's Manual

Operation
Multi-Function Control Panel (continued)
LOCK
The LOCK feature is designed to prevent activation of the garage door opener from remote controls while still allowing
activation from the door control and keyless entry. This feature is useful for added peace of mind when the home is
empty (i.e. vacation).
Activate: Press and hold the LOCK button for 2 seconds. The command LED will flash as long as the lock
l
feature is activated and your handheld remote control will not operate your door at this time.
Deactivate: Press and hold the LOCK button again for 2 seconds. The command LED will stop flashing
l
and normal operation will resume.
PROGRAM
Any compatible remote controls, wireless keyless entry, or myQ
opener by pressing the Learn button.
Push Bar
LIGHT Button
® accessories can be programmed to the garage door
Command LED
LEARN Button
LOCK Button

Push Button Door Control

SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control to the garage door opener, press the
push button until the garage door opener activates (it may take up to 3 presses).
35
Push Button