Using The Push Button Door Control 883Lmw - Chamberlain Contractor Series Manual

Operation

Using the Push Button Door Control 883LMW

SYNCHRONIZE THE DOOR CONTROL
To synchronize the door control to the garage door opener, press the push button until
the garage door opener activates (it may take up to 3 presses). Test the door control by
pressing the push button, each press of the push button will activate the garage door
opener.
Push Button
PUSH BUTTON
Press the push button to open or close the door.
LIGHT/LEARN BUTTON
Press the LIGHT button to turn the garage door opener lights on or off. When the lights
are turned on they will stay on until the LIGHT button is pressed again, or until the
garage door opener is activated. Once the garage door opener is activated the lights will
turn off after the specified period of time (the factory setting is 4-1/2 minutes). The
LIGHT button will not control the lights when the door is in motion.
LIGHT/LEARN
Button
38