Table of Contents
Advertisement
Open the back cover by gently pulling the front cover upwards.
Add water to the reservoir
When the 'Add Water' indicator is illuminated, this means there is no water in the reservoir.
1.
Open the cover and remove the ice bucket.
2.
Pour drinking water into the water reservoir. Ensure the water level is below the
'MAX' line marked inside the reservoir.
3.
Replace the ice bucket and the cover.
4.
The ice maker will automatically resume operation after 15-60 minutes. Press the
Ice/Clean button to resume in 3 minutes.
Remove ice cubes
• When the 'Ice Full' indicator is illuminated, this means the ice bucket is full.
• Open the cover and use the ice scoop to remove the ice cubes.
• The ice maker will automatically resume operation when the ice bucket is emptied.
Advertisement
Table of Contents
