Table of Contents
Advertisement
WARNING: Do not use any liquid other than drinking water in the ice
cube maker.
1.
Ensure that the drain plug is closed well.
2.
Open the cover and remove the ice bucket. Pour drinking water into the water
reservoir. Ensure the water level is below the 'MAX' line marked inside the reservoir.
3.
Replace the ice bucket and the cover.
4.
Plug the power cord into an electrical outlet. The ring indicator will illuminate red
and the ice maker will be in standby.
5.
Press the Ice/Clean button to start making ice. The ring indicator will flash white
while in operation.
6.
When the ice bucket is full, the ice maker will stop operating and the 'Ice Full'
indicator will illuminate.
7.
Remove the cover and use the ice scoop to remove the ice from the ice bucket.
Remove the cover
Pour water
Advertisement
Table of Contents
