Roofmarker Lamps - Chevrolet Low Cab Forward 2023 Manual

3. Disconnect the connector (1) for the turn
signal lamp (2) and then remove the
socket.
4. Pull out the bulb (1) from the socket (2)
and replace it with a new one.
5. To install the lights, perform the same
sequence of operations in reverse order,
keeping in mind to turn the socket
clockwise to securely lock it.
If the socket is not locked securely, water
could get inside the light and lead to a
breakdown.
Vehicle Care

Roofmarker Lamps

1. Loosen the screws (2) and remove the
lens (1).
2. Remove the bulb (3) from the socket (4)
and replace it with a new one.
3. To install the lights, follow the removal
procedure in reverse.
If the screwing procedure is inadequate,
water may infiltrate into the lamp unit.
225