Texsport 02848 Instructions

Brookhaven arbor

Advertisement

Quick Links

Thank you for purchasing this Texsport arbor. Please read and understand each step of the set-up instructions. We encourage you to set-up this
arbor at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your
new arbor and that it will give you many years of camping pleasure.

PARTS LIST:

DESCRIPTION ...................QTY........................PART NO.
Center Hub ......................1 EA.
Corner Roof Joints ..........4 EA.
Steel Roof Poles ..............4 EA.......................#1
Steel Roof Poles ...............4 EA.......................#2
Steel Roof Poles ..............4 EA.......................#3
Steel Eaves Poles ............8 EA.......................#7
Steel Eaves Poles ............4 EA.......................#8
Steel Leg Poles ................4 EA.......................#4
Steel Leg Poles ................4 EA.......................#5
Steel Leg Poles ................4 EA.......................#6
Guy Ropes
Clews
Stakes

ASSEMBLY INSTRUCTIONS

Step 1
Lay out the corners and connect the horizontal frame.
Step 2
Start the top frame assembly at the corners and connect as illustrated in
Fig. 1.
Step 3.
Pull the arbor cover tightly over the assembled top frame and secure the
velcro straps to the frame arbor skin
Step 4.
Lift up the covered top frame and insert the set of legs beginning poles #4
as illustrated in Fig 2.
Step 5
Pull the arbor cover tightly all around and attach the "T" clips at each leg.
Fig. 1
7
8
7
2
1
3
7
8
7

GUY ROPE INSTRUCTIONS

STEP 1. . . .Tie a loop with a knot to fit over the pin on the top of the pole system or tie the rope to a
"D" ring, depending on which product you have.
STEP 2. . . .Tie the other end of the rope to the metal clew.
STEP 3. . . .Loop the guy rope around the stake and inter-twine the clew and guy rope. Make sure you
have tension on the guy rope after you are done. If there is not enough tension, just slide
the clew up the guy rope towards the top of the pole or "D" ring to tighten.
Tent
Stake
Item 02848 - Brookhaven
o not apply excessive force to this product.
7
3
8
2
1
3
1
2
1
2
8
3
7
Rope
Plastic
Clew
INSTRUCTIONS
Fig. 2
4
7
5
7
6
Rope and
"D" Ring
Adjuster
Pole
rbor
5
4
6
5
6
Ground
Stake
Loop
Tie Loop
4
5
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 02848 and is the answer not in the manual?

Questions and answers

Summary of Contents for Texsport 02848

  • Page 1 Thank you for purchasing this Texsport arbor. Please read and understand each step of the set-up instructions. We encourage you to set-up this arbor at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new arbor and that it will give you many years of camping pleasure.
  • Page 2 REPAIR: For small tears use a an adhesive backed rip-stop nylon patch. We recommend Texsport Nylon rbor/Tent Repair Kit which may be found at your local outdoor outfitter or camping store.

Table of Contents

Save PDF