Texsport Authentic Adventure Gear 01165 Instructions

WASHING:
Hand wash with a sponge, using a mild soap. Never use detergents or washing machines as they may damage the coating or seams.
remember to use seam sealer once tent had been washed to insure waterproofing.
HOW LONG WILL A NYLON TENT LAST?
Various conditions will affect the length of service which you receive:
a. nylon tent which is left erected all summer may last only one or two seasons, as the sun's ultra-violet rays
damage the nylon.
b. Never store a tent wet or damp, as mildew may develop. It will not harm nylon, however, mildew is unsightly
and may damage other parts of the tent (i.e. zipper tapes).
c. void spraying insect repellent or hair sprays, etc. on tent fabric as they may be harmful.
REPAIR:
For small tears use a an adhesive backed rip-stop nylon patch. We recommend Texsport Nylon Tent Repair Kit which may be found at
your local outdoor outfitter or camping store.
QUESTIONS:
If you should have any questions, problems or comments, please call our Customer Service Department at
1-800-231-1402 or e-mail info@texsport.com. This Department is open M–F from 8 a.m.–5 p.m. CST.
Thank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent
at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new
tent and that it will give you many years of camping pleasure.
PARTS LIST:
A ......Front arch pole
B........Rear arch pole
C........Rainfly
D ......Tent skin
E ........Guy ropes, clews
and stakes
NOTE:
Prepare your camp site by removing
all sharp stones, twigs, etc. The site
should be flat and have no depres-
sions that could collect rain water.
STEP 1 - Spread out the tent skin
MODEL: SAGUARO BIVY
SHELTER TENT
ITEM 01165
MADE IN CHINA
EMC10
INSTRUCTIONS
Item 01165
Saguaro ivy Shelter Tent
o not apply excessive force to this product.
B
A
C
E
STEP 2 - Assemble the front arch
pole (A) and insert through tent
sleeve.
D
STEP 3 - Insert the front tent pole
into the first grommet on the web
tabs on each side.