Texsport 01831 Calypso Cabana Assembly Instructions And Use And Care Manual

Thank you for purchasing this Texsport cabana. Please read and understand each step of the set-up instructions. We encourage you
to set-up this cabana at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up pro-
cess. We hope you enjoy your new cabana and that it will give you many years of camping pleasure.

PARTS LIST:

A �����1 Cabana skin
B �����1 Long pole
C �����2 Sets of short poles
D �����Stakes
NOTE:
Prepare your camp site by
removing all sharp stones,
twigs, etc� The site should be
flat and have no depressions
that could collect rain water�
Step 1 - Spread the cabana
skin�
Step 4 - Insert the pin and ring
into the ferrule end of the long
side pole� Do this on both ends�

ASSEMBLY INSTRUCTIONS

01831 Calypso Cabana
Do not apply excessive force to this product.
Step 2 - Assemble 1 short pole and
push it through the roof sleeve,
ferrule side first� Repeat this step
for the remaining short pole�
DO NOT insert the pin into the pole�
Step 5 - Insert the pin and ring
into the ferrule of the short
rear roof poles�
Step 3 - Assemble the long
pole and push it up through
the sleeve from one side, over
the two roof poles, down to
side of the cabana skin�
Step 6 - Insert the pole's pin
into the grommeted web strap
above the front opening of the
cabana�