Texsport 02869 Assembly Instructions

Thank you for buying a Texsport uthentic dventure Gear Product. We hope you enjoy your new shade and that it will serve you with
many years of camping pleasure. We encourage you to read and understand each step of the set-up instructions prior to working with
the shade.
PARTS LIST:
A - 1 Shade Skin
B - 2 Sets of Long Fiberglass Poles
C - Shade Stakes, Ropes and Clews
STEP 1 - Spread the shade skin
on the ground next to your truck
or S.U.V.
STEP 4 - Repeat step 3 for the
remaining pole. At this point,
your shade should look like the
image above.
SSEMBLY INSTRUCTIONS
o not apply excessive force to this product.
A
STEP 2 - Assemble 1 pole and
push it through the sleeve -
rubber end first.
STEP 5 - Insert the pin and ring
into the bottom of the poles.
Item 02869
Spinnaker uto Shade
C
STEP 3 - Follow the sleeve and
cross the pole to the opposite
corner and insert into the
webbed pocket.
STEP 6 - If the shade skin is too
loose or tight, it may be adjusted
with the webbed tension belt.
B