Hitachi Relion 670 Series Applications Manual page 275

1MRK511407-UUS Rev. N
GUID-CEE770E3-3664-4243-9CAE-E0CEB19AFE9B V1 EN-US
Figure 105:
User Options
• If the user selects 'Yes', then all the changes made under the last edit will be discarded. This
includes all settings of the given access points that have been edited.
• User can select 'No, edit' if the user wishes to re-edit or correct the settings.
Rules for default gateway setting of given access point
Default Gateway IP address can be 0.0.0.0 or it should fall in the same subnetwork (subnet) which is
defined by the IP address and subnet mask of the given access point.
If the user configures the default gateway in a subnet other than the subnet of the access point, then the
following pop-up will be shown to the user before saving the changes.
GUID-19001203-16B3-4087-9ACC-C00EA8DD4212 V1 EN-US
Figure 106:
• If the user selects 'Yes', then the default gateway setting will be saved.
• User can select 'No' if the user wishes to re-edit or correct the settings.
Phasor measurement unit RES670
Application manual
Error
Warning
© 2017 - 2023 Hitachi Energy. All rights reserved
Section 18
Ethernet-based communication
269